July 23, 2017. I needed to drill a hole in the roof of my truck. Crazy? Yes. Necessary: Yes. Curious why? I covered that here. So. Removing the headliner. I searched and searched for visual instructions on this and didn’t find any, though I did have the FSM info which…
Leave a CommentGuide Section: Interior
Removing it, sound deadening, audio work.
December 30, 2017. I've removed my dash trim (at least, the driver side) more times than I'd care to admit, and figured it was time to write up the procedure - because I remember how daunting it was the first time. Removal starts at the bottom-front of the center console,…
Leave a Comment
In the last post, I outlined the Materials and Prep necessary for sound deadening a 1st gen Tacoma. This time, we'll walk through the specifics on how to do the actual deadening. As a reminder, all you really need to do this job are the following: RAAMAudio Package 2 30…
7 Comments
While I believe the saying, "They don't make them like they used to," generally does apply to a 1st gen Tacoma, it most definitely does not apply to the sound deadening of these old trucks. Nearly any vehicle you get today will have better sound deadening than a 20-year old…
7 Comments